Product Information

TASCAM's US-1x2 brings great quality desktop recording to a price never before possible. It features a high-quality Ultra-HDDA microphone preamp as well as a 1/4" line input - switchable to instrument level for guitar or bass.

In addition, both stereo line inputs and outputs are found on the rear panel for fast an easy connection of all of your exisitng audio gear. The unique design of the bio-cell side panels angles the US-1x2 up from the desktop for easier usability and - to make sure that you are up and running in minutes - both Steinberg Cubase LE and Cubasis LE are also included.

TASCAM's own Ultra-HDDA mic preamps are the cleanest, quietest, and best-sounding from any interface in their range. A gain range of 57dB makes them ideal for any type of mic – dynamic, condenser, or ribbon. With preamp performance well beyond any interfaces in their price range, the Ultra-HDDA preamp on the US-1x2 makes your tracks sound like a record.
TASCAM's Ultra-HDDA (High Definition Discrete Architecture) mic preamp design is based on discrete components, just like classic professional gear. They achieve an incredible EIN rating of -125 dBu, meaning their noise level is practically below the range of hearing. Other impressive specs include a signal-to-noise ratio of 101 dB, out-speccing anything in its price range. But instead of judging the design merely by test measurments, key components were selected following extensive listening tests.
TASCAM uses proven, great-sounding components throughout the US-1x2. One example are NE5532 op-amps, famously used throughout classic recording consoles and signal processors due to their sweet, musical sound.
The mic input features a professional XLR connector, which supplies +48V phantom power for condenser microphones. Built from heavy duty metal throughout, the US-1x2 stays put even when moving mics around and changing connections.
The combo input jack includes TRS inputs for balanced line-level signals from professional processors and synthesizers. Finally, the two inputs can be switched to high-impedance for direct recording of electric guitar and bass. (Only the XLR or 1/4" input can be used, not both at the same time.)
Non-powered mics like dynamic and ribbon designs can sound great, but they also have a lower output level than condenser microphones. The US-1x2's Ultra HDDA mic preamps not only feature 57dB of gain, but also a low-noise design so you don't crank up the noise at the same time. Plug in modern or classic mics and still get plenty of level on your tracks.
Current Stock:
Shipping Cost: Calculated at Checkout
Width: 3.00
Height: 7.00
Depth: 8.00

Customer Reviews 0 (0 Reviews) Write a review of this product